Products-banner

Products

Lifecosm COVID-19 Antigen Test Cassette Nasal test

Product Code:

Item Name: COVID-19 Antigen Test Cassette(Nasal test)

Summary:Detection of specific Antigen of SARS-CoV-2 within 15 minutes

Principle: One-step immunochromatographic assay

Detection Targets: COVID-19 Antigen

Reading time: 10 ~ 15 minutes

Storage: Room Temperature (at 2 ~ 30℃)

Expiration: 24 months after manufacturing


Product Detail

Product Tags

COVID-19 Antigen Test Cassette

Summary Detection of specific Antigen of Covid-19

 within 15 minutes

Principle One-step immunochromatographic assay
Detection Targets COVID-19 Antigen
Sample  oropharyngeal swab, nasal swab, or saliva
Reading time 10~ 15 minutes
Quantity 1 box (kit) = 1 devices (Individual packing)
Contents 1 Test Cassettes: each cassette with desiccant in individual foil pouch

1 Sterilized Swabs: single use swab for specimen collection

1 Extraction Tubes: containing 0.4mL of extraction reagent

1 Dropper Tips

1 Package Insert

 

 

Caution

Use within 10 minutes after opening

Use appropriate amount of sample (0.1 ml of a dropper)

Use after 15~30 minutes at RT if they are stored under cold circumstances

Consider the test results as invalid after 10 minutes

 

COVID-19 Antigen Test Cassette

INTENDED USE
The COVID-19 Antigen Rapid Test Cassette is a lateral flow immunoassay intended for the qualitative detection of SARS-CoV-2 nucleocapsid antigens in anterior-nasal swab from individuals who are suspected of COVID-19.
Results are for the identification of SARS-CoV-2 nucleocapsid antigen. Antigen is generally detectable in nasal swab during the acute phase of infection. Positive results indicate the presence of viral antigens, but clinical correlation with patient history and other diagnostic information is necessary to determine infection status. Positive results do not rule out bacterial infection or co-infection with other viruses. The agent detected may not be the definite cause of disease.

Negative results do not rule out SARS-CoV-2 infection and should not be used as the sole basis for treatment or patient management decisions, including infection control decisions. Negative results should be considered in the context of a patient’s recent exposures, history and the presence of clinical signs and symptoms consistent with COVID-19, and confirmed with a molecular assay, if necessary for patient management.
 
COMPOSITION
Materials Provided
Test Cassette: each cassette with desiccant in individual foil pouch
Sterilized Swabs: single use swab for specimen collection
Extraction Tubes: containing 0.5 mL of extraction reagent
Dropper Tip
Package Insert
Timer
Materials Required but not Provided

[Preparing to do the test]
1. Keep a clock, timer or stopwatch at hand.
  1. Ensure that all test components are kept at room temperature (15-30 ℃).
  2. Ensure that the packaging is intact; Do not use the test if there is visible damage of the foil packaging.
  3. Open the box and you will get the components shown below:
p1
p3
p2
p4
Instructions for Use

Swab

Extraction Reagent Tube Dropper Tip

 

p5

Note: Only open the foil packaging of the test cassette when you are ready to carry out the test. Use the test cassette within 1 hour.

[Before starting]

Wash your hands in soapy water and dry thoroughly.

p6

[Step-By-Step Instructions]

1. Open Extraction Reagent Tube
Carefully tear off the sealed foil film on the extraction reagent tube.

p7

2.Insert Tube into Box
Gently press the tube through the perforated hole in the box.

p8

3.Remove the Swab
Open the swab package at the stick end.

Note: Keep fingers away from swab tip.

 

p9

Take out the swab.

p10

4. Swab the Left Nostril

Gently insert the entire tip of the swab, app. 2.5 cm into the left nostril.

p11

(Approximately 1.5 times the length of the swab tip)

Firmly brush the swab against the inside of the nostril in a circular motion 5 times or more.

12

5. Swab the Right Nostril
Remove the swab from the left nostril and insert it into right nostril about 2.5 cm.

p1

Firmly brush the swab against the inside of the nostril in a circular motion 5 times or more.

p2
p3
  • CHECK!
  • You should swab both nostrils.
  • Note: A false negative result may occur if sample collection is not thoroughly undertaken.

6.Insert the Swab into the Tube

Insert the nasal swab into the tube which contains the extraction reagent.

 

p4

7.Rotate the Swab 5 Times
Rotate the swab at least 5 times while pressing the swab tip against the bottom and the sides of the tube.

p5

Let the tip of the swab soak in the tube for 1 minute.

p6

8.Remove the Swab
Remove the swab while squeezing the sides of the tube against the swab, to release the liquid from the swab.

p7
p8

 Cover the tube with the provided tip tightly and insert the tube back into the box.

p9

9.Take out the Test Cassette from the pouch
Open the sealed pouch and take out the test cassette.

p10

Note: Test cassette must lay FLAT on the table during the entire testing.

 

p11

10.Add Sample to the Sample Well

Hold the tube vertically over the Sample Well - not at an angle.

p12
Add 3 drops from the tube into the Sample Well by gently squeezing the sides of the tube.Note 1: A false negative result may occur if less than 3 drops of sample is used.
(Approximately 1.5 times the length of the swab tip)
 
Note 2: The result will not be affected if 1-2 more drops of sample are accidently added – as long as you can read a C-line (see Read result below).

11. Timing
Start the clock / stopwatch or timer.

12. Wait 15 Minutes

Read the test result at 15-20 minutes, DO NOT read the result after 20 minutes.

8

Positive Result
Two lines appear. One coloured line appears at the control region (C), and another appears at the test region (T).

55

A positive test result indicates that you are  likely  to  carry  the  COVID-19  disease. Contact your State or Territory Coronavirus testing services to get a laboratory PCR test as soon as possible, and follow local guidelines for self-isolation to avoid spreading the virus to others.

Negative Result

One coloured line appears at the control region (C), and no line appears at the test region (T).

19

Note: If a C-line does not appear, the test result is invalid regardless of the appearance of a T-line or not.

 

If a C-line does not appear, you need to retest with a new test cassette or contact your State  or Territory Coronavirus testing services to get a laboratory PCR test

Dispose of the used test kit

94

Collect all parts of the test kit and place in the waste bag , then dispose the waste according to the local regulation.
 
Wash your hands thoroughly after handling


  • Previous:
  • Next:

  • Write your message here and send it to us